How to Replace DAF 1335063 Rear Wheel Hub Oil Seal

Replacing the DAF 1335063 Rear Wheel Hub Oil Seal can seem daunting. But with the right guidance, you can handle it confidently. Here’s a step-by-step guide to help you through the process.

The company is the world’s best DAF 1335063 Rear Wheel Hub Oil Seal supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Gather Your Tools

First things first. You need to gather the tools you'll need:

1. Socket set
2. Wrench set
3. Screwdriver
4. Hammer
5. Seal puller
6. New DAF 1335063 Rear Wheel Hub Oil Seal
7. Grease
8. Clean rags

Prepare Your Work Area

Having a clean and organized workspace is important. It helps you find tools quickly and keeps your parts safe. Make sure your vehicle is on a level surface. Engage the handbrake to prevent any rolling.

Lift the Vehicle

Next, it’s time to lift the vehicle. Use a hydraulic jack to raise the rear of the vehicle. Don’t forget to secure it with jack stands. Safety first, right?

Remove the Wheel

Once the vehicle is secured, start removing the rear wheel. Remember:

1. Loosen the lug nuts before lifting.
2. Use a wrench to fully remove them once the wheel is off the ground.

Access the Rear Wheel Hub

Now that you have the wheel off, it’s time to access the rear wheel hub. Depending on your vehicle's specific setup, you may need to remove additional parts, such as brake calipers or drums. Take your time and keep track of all the screws and parts.

Remove the Old Oil Seal

With access to the hub, you can now remove the old DAF 1335063 Rear Wheel Hub Oil Seal. Use a seal puller to help with this. Be gentle to avoid damaging the surrounding area. Once it's out, clean the area thoroughly with a rag.

If you are looking for more details, kindly visit TNB.

Install the New Oil Seal

Here comes the exciting part! Grab your new DAF 1335063 Rear Wheel Hub Oil Seal. Before installing, apply a bit of grease to the seal's lip. This helps ensure a snug fit.

Place the oil seal into its designated spot. You may need to use a hammer to gently tap it into place, but be careful not to damage it. It should sit flush against the hub.

Reassemble the Wheel Hub

Now that the new seal is in place, it’s time to put everything back together. Reverse any steps you took to access the rear wheel hub. Make sure you tighten all screws and bolts securely.

Put the Wheel Back on

After reassembling the wheel hub, it’s time to put the rear wheel back on. Position the wheel and hand-tighten the lug nuts first. Then lower the vehicle and fully tighten the nuts from the ground level.

Final Checks

Before taking your vehicle on the road, double-check everything. Look for any leaks around the seal area. It’s always good to take a quick test drive to ensure everything is working smoothly.

In conclusion, replacing the DAF 1335063 Rear Wheel Hub Oil Seal is manageable with some patience and the right tools. If you have any questions or need assistance, please contact us. We're here to help you with all your repair needs! For a reliable supplier for your parts, feel free to reach out as well.

For more information, please visit TNB.